Single Way Sleeve Compensator
Maintenance free direct buried single way sleeve compensator is one
of the compensators. It is widely used in many industries because
of its advantages of long service life, good corrosion resistance,
no requirement for chloride ion content, bidirectional compensation
and increasing compensation amount.
Performance of single way sleeve compensator
The features of the expansion capacity and the strong pressure
resistance of the maintenance free direct buried single way sleeve
compensator are as follows:
Maintenance free direct buried single way sleeve compensator plays
an important role in many industrial fields. Different types of
compensators have different application range and methods. The
application of compensator joint in heating pipe. In order to
prevent the deformation and damage of the pipeline due to the
thermal elongation or temperature stress during heating up of the
heating pipe, a compensator should be set on the pipeline to
compensate the thermal elongation of the pipe, so as to reduce the
stress of the pipe wall and the action on the valve or support
structure.
Single way sleeve compensator structure
Technical data of single way sleeve compensator
Nominal Diameter | Compensation Single Way △ | Connection Tube Outer Diameter | Maximum Outer Diameter | Length
L | Single Way Friction KN |
| mm | mm | mm | mm | mm | 1.6Mpa |
| 50 | 150 | 57 | 230 | 610 | 1.72 |
| 65 | 150 | 76 | 250 | 610 | 2.68 |
| 80 | 150 | 89 | 265 | 610 | 3.42 |
| 100 | 150 | 108 | 280 | 610 | 4.51 |
| 125 | 150 | 133 | 310 | 610 | 5.23 |
| 150 | 250 | 159 | 335 | 810 | 7.89 |
| 200 | 250 | 219 | 415 | 810 | 13.10 |
| 250 | 250 | 273 | 465 | 860 | 19.5 |
| 300 | 250 | 325 | 520 | 860 | 24.72 |
| 350 | 250 | 377 | 570 | 860 | 29.15 |
| 400 | 300 | 426 | 620 | 970 | 37.63 |
| 450 | 300 | 480 | 670 | 970 | 44.59 |
| 500 | 300 | 530 | 730 | 990 | 52.16 |
| 600 | 300 | 630 | 830 | 990 | 59.47 |
| 700 | 400 | 720 | 930 | 1280 | 65.12 |
| 800 | 400 | 820 | 1030 | 1280 | 78.37 |
| 900 | 400 | 920 | 1135 | 1280 | 96.53 |
| 1000 | 500 | 1020 | 1235 | 1550 | 133.5 |
| 1100 | 500 | 1120 | 1340 | 1550 | 147.21 |
| 1200 | 500 | 1220 | 1440 | 1550 | 158.32 |
Note:Flange supply according to GB/T 9119-2000 standard ,also can
supply according to clients’other requirements.
Single way sleeve compensator advantage
1. The single way sleeve compensator has a long service life, and
its fatigue life is equivalent to that of the pipeline. After
special treatment, the sliding surface has good corrosion
resistance in salt water and salt solution, which is more than 50
times higher than that of austenitic stainless steel.
2. The maintenance free direct buried single way sleeve compensator
has no requirement for chloride ion content, and is especially
suitable for the system with excessive chloride ion content in
medium or surrounding environment.
3. The maintenance free direct buried single way sleeve compensator
can be divided into one-way and two-way compensation structures.
The two-way compensation structure is characterized by that the
sliding sleeves at both ends of the compensator always slide freely
no matter where the medium flows from, so as to achieve two-way
compensation and increase the compensation amount.
Single way sleeve compensator application
Single way sleeve compensator is called tubular expansion joint and
pipeline expansion joint, which is the compensation device of hot
fluid pipeline, mainly used for the auxiliary equipment of linear
pipeline. It is suitable for hot water, steam, grease and other
media. Through the sliding movement of the sliding sleeve, the
thermal expansion compensation can be achieved.
FAQ
Q1:Can the single way sleeve compensator be marked with customized logo?
A1:Yes,the single way sleeve compensator can be marked with your logo. We could provide OEM&ODM service
for single way sleeve compensator.
Q2:What’s the face to face length of single way sleeve compensator?
A2:The face to face length of single way sleeve compensator can be L130, L152,L203... We also could accept customized length
according to your requirements.
Q3:Can you provide drawings of single way sleeve compensator?
A3:Yes,we could provide drawings of single way sleeve compensator for you.Please contact us to get the drawing of single way sleeve compensator.
Q4:What certificates of single way sleeve compensator can you provide?
A4:We could provide CE,ISO certificate for our single way sleeve compensator.
Q5:Can we get a sample of single way sleeve compensator?
A5:Yes,we could provide samples for you to test the quality of our single way sleeve compensator.
Q6:What’s the warranty period of single way sleeve compensator?
A6:We provide 18 months’ warranty for our single way sleeve compensator.
